The background to the newly developed system was the recurring quality problems, insufficient operator safety and a lack of traceability. The products are bonded with an adhesive that is cured by irradiation with UV light. This repeatedly resulted in defective bonding, which was attributed to insufficient UV irradiation. Thus, the requirements for the new system were live monitoring of process values, such as exposure time, UV intensity and recipe parameters, as well as complete data storage for traceability of process parameters and operator activities.
GMP qualification and the V‑model
For manufacturers of products for medical use, qualification of a new system is a fundamental part of quality management and an important prerequisite for maintaining manufacturing licenses. For this reason, the entire project was implemented in accordance with GAMP 5 based on the V‑model and the software was validated in compliance with the EU GMP regulation, which consists of the following components:
- DQ – Design Qualification
- IQ – installation qualification
- OQ – functional qualification -(Operational Qualification)
- PQ – Performance Qualification
Thus, it must be demonstrably possible to show that a plant or machine has been constructed and designed in accordance with GMP (DQ), has been connected and installed as planned (IQ), functions properly in the intended operating range (OQ) and performs as required (PQ). All these criteria of the validation process were taken into account by Quality Automation GmbH during the implementation of the project in close cooperation with the customer.
In the previous system, the door of the exposure chamber was opened and closed manually, without any safety precautions. In the new system, the control of the door is automated and the position of the door is continuously monitored by inductive sensors and a PILZ safety switch. This serves the purpose, for example, that the door is not opened after an exposure until the UV lamp is switched off. If the door opens due to external influences during the exposure process, the PILZ safety switch immediately switches off the UV lamp and issues an alarm in optical and acoustic form.